1: Be sure that all machine’s have effective and properly working guards that are always in place where machine’s are operating.
2: Replace guards immedietly after any repair.
3: Don’t attempt to oil, clean, adjust or repair any machine while it is running, stop the machine and lock the power switch in the off position.
4: Even after the power is off, don’t leave the machine until it has stopped running. Some one else may notice that it is still in motion and be injured.
5: Don’t operate any machine unless authorized, to do so by the instructor or under his supervison.
6: Don’t try to stop the machine with your hand or body.
7: Always see that work and cutting tools on any machine are clamped securely before starting.
8: Keep the floor clean of metal chips or curls and waste pieces, put them in container provided for such things.
9: Don’t operate machinery when the instructor is not in the workshop.
10: When working with another worker only one should operate machine or switches.
11: Don’t rest against the machine.
12: Concertrate on the work and don’t talk unnecessary while operating machine.
13: Don’t talk to others when they are operating a machine.
14; Get first aid immedietly for any injury.
15: Be sure you have sufficient light to see clearly check with the supervisor if you don’t enough.